A chop saw, which is actually a circular saw attached to a pivoting arm, creates fast and precise crosscuts in a lot of materials.
During use, a contractor presses the material towards a fence, after which to chop the material, he draws the saw blade down onto it.
An adjustment bar regulates the cut’s direction. Carpenters utilize the saws, sometimes called miter saws, to slice lumber, tile, and steel.
Since a chop saw allows you to cut through boards very quickly, countless contractors utilize it instead of using a manual, traditional way involving a circular saw or a hand-held saw.
To create a slice, the carpenter pinpoints the width he wants to cut the panel, then he presses the panel all over towards the fence and glides the panel over the fence till the mark lines up with the saw blade.
He switches on the saw and draws the blade all the way down, which slices the panel. If the job needs a cut with a specific angle, he changes the blade to a certain pre-determined angle and then creates the slice.
Chop saws having adjustable miter angles and bevels, also referred to as compound miter saws, create rapid work of complex finishing that calls for an angle slashed throughout the width and thickness of the panel.
A compound miter change angles much as an ordinary chop saw, and since the saw blade and motor can flop to a single side, in addition, it adjusts to chop bevels.
Things that contractors use chop saws for include cutting crown molding, framing roofs, and stairways.
Tile installments vary from easy square tile layouts to complex designs. Whatever the design, at one point, for example, close to a wall, the installer must trim the tile to fit.
Chop saws made for cutting tile usually incorporate a water supply, which lubricates the saw blade while slicing and helps in avoiding the tile from fracturing.
The specialist marks the specified cut then holds the tile against the fence. He activates the water pump and carefully cuts the tile to shape.
When equipped with a special metal-cutting disc, a mechanic could use the saw to chop steel. Some prevalent kinds of metals it slices include square and rounded tubes and solid metal bars.
Similar to various other purposes, the owner brings down the blade on top of the steel and carefully cuts right through it. Just as the blade cuts through the steel, it could throw sparks.
Therefore, the mechanic should use a metal-cutting chop saw in fire-resistant locations.
What You'll Learn...
- No Time to Read? Check Out Our Top Picks at a Glance!
- Porter-Cable Chop Saw
- Porter-Cable Warranty
- Metal Chop Saw Blades
- Hitachi Chop Saw Reviews
- Wrapping it Up
No Time to Read? Check Out Our Top Picks at a Glance!
|Top||PORTER-CABLE Chop Saw, 15-Amp, 14-Inch (PCE700)||Prime||Check Amazon Price|
|Hitachi C10FCG 15-Amp 10" Single Bevel Compound Miter Saw||Prime||Check Amazon Price|
|Hitachi C12FDH 15 Amp 12-Inch Dual Bevel Miter Saw with Laser (Discontinued by Manufacturer)||Prime||Check Amazon Price|
|Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker||Prime||Check Amazon Price|
Porter-Cable Chop Saw
Porter-Cable made sure that their entire miter saw is made with the highest quality in order to give a high performance. When talking about portability, this brand offers compactly made chop saws that are portable enough to be used anywhere.
This chop saw is now actually out in the market, making a name for itself.
Porter-Cable also made sure that their products are worth the money. No one wants to buy an expensive product that is not made with good quality and cannot last long.
PORTER-CABLE Chop Saw, 15-Amp, 14-Inch (PCE700)
The PORTER-CABLE Chop Saw PCE700 has now become very popular in the market, and a lot of reviews have come out because many customers like how the unit performs.
As a reputable brand, Porter-Cable never stopped creating machines that are highly sophisticated and used in different industries.
If you’re looking for a reliable and powerful chop saw, look no further than the PORTER-CABLE Chop Saw PCE700!
The main use of the PORTER-CABLE Chop Saw PCE700 is to make the most accurate crosscuts.
It has all the features and comes with the quality that you need when it comes to cutting and finishing the woods and other materials.
What We Like
The PORTER-CABLE Chop Saw PCE700 is designed to provide an efficient job that no other chop saw can provide. The materials used in this unit’s construction process are carefully selected to give you the best performance.
At 15-amp and 3,800 rpm motor speed, the Porter-Cable metal chop saw is ready to make any cutting of iron pipe, angle iron, threaded rod, conduit, square tubing, and much more.
Innovative front D-handle design minimizes the amount of pull necessary to move the handle when doing the cut.
The PORTER-CABLE Chop Saw PCE700 is 21-inches in length but weighs only 32.5 pounds, so it’s easy to move around if you go from one location to another.
The PORTER-CABLE Chop Saw PCE700 comes with a 3-year limited warranty, 1-year free service contract, and 90-day money-back guarantee. You got yourself covered.
If you’re looking for a great chop saw that does 90-degree, 45-degree, and anything in between, then you’re going to want to consider the PORTER-CABLE Chop Saw PCE700. We think it will be absolutely worth it, especially at this price.
Metal Chop Saw Blades
A metal chop saw is one of the most essential power tools used both for industrial and commercial purposes. The tool is the counterpart of the miter saw, sometimes used interchangeably, which is being used for all types of wood crafts.
A metal chop saw is a saw used for cutting metal in the same way as when woods are being cut by traditional miter saw. This equipment was made for the same purpose, which is to cut metal with precision and also for the user to achieve high-quality output.
Generally, there are three types and sizes of blades that are being used in this type of tool. The sizes of the blades that are being used in this power tool measure three inches, twelve inches, and the fourteen sized blades.
The larger size blades are typically used in cutting large-sized pipes. When purchasing a chop saw, it is essential that the purchaser must also consider the size of the thing.
This is one of the things that must be considered for the user to be assured that they will make an excellent, easy, and precise cut, and also be assured that the money spent will not be wasted.
Whatever the size of the blade, it will still be capable of cutting metal pipe and even flat-stock perpendicular to its base. This tool is only used in making straight and angled cuts.
This can also be used and be installed on any masonry cutoff wheel to cut masonry. Those are just some of the information where this power tool can be used.
Hitachi Chop Saw Reviews
Hitachi, as a well-known power tool brand, has been providing the most effective chop saws in the industry. With 100 years of operation, the company has produced sophisticated machines that are used in different industries.
The company provides the most durable saw products that only require low maintenance. The Hitachi chop saw was designed with revolutionary features offering an advantage among its competitors.
When talking about versatility, chop saws made by Hitachi are incredibly powerful, which is enough for cutting accurate pieces effectively.
As far as accuracy is concerned, Hitachi’s chop saw is carefully engineered to reach the market’s need for the right equipment that can deliver accurate cuts.
The term “chop saw” is sometimes used interchangeably with “miter saw.” The most common use for power miter saw is to make accurate crosscuts.
Soft pieces of wood are usually cut into pieces for frames and crown moldings. The Hitachi chop saw, for this matter, can produce effective results.
Whether it is used in job sites or in workshops, it can produce the same quality. When talking about portability, the Hitachi brand offers compactly made chop saws that are portable saws to be used anywhere.
No matter what type of miter or chop saw it is, Hitachi can provide it, and some of it is actually out in the market, making its reputation.
Here are some of the best Hitachi chop saws on the market today!
Hitachi C10FCH2 Miter Saw with Laser, 10-Inch
Laser marker system for exact alignment and predictable blade placement. Simple miter adjustments between 0 and 52 degrees.
Gorgeous bevels with a bevel range of 45 degrees to the left. The 15-amp motor generates up to 5,000 rpm for the effortless making of crosscuts and miters.
Hitachi C10FCG 15-Amp 10″ Single Bevel Compound Miter Saw
15-amp motor that generates a no-load speed of up to 5,000 rpm. Make crosscuts and miters with ease.
A horizontal handle with a vibration-reducing elastomer grip keeps you in control at all times. Dust collector minimizes the accumulation of particles in your workspace and inside the saw.
Hitachi C12FDH 15 Amp 12-Inch Dual Bevel Miter Saw with Laser
With a 15-amp and 1,950-watt motor, cutting through pipe, rebar, and shaped steel is easy. Quick-lock and release vise increase productivity.
A simple adjustment allows miter cuts up to 45-degrees in either direction. Comes with a 5-year warranty. Good features at its price.
Wrapping it Up
Even with the toughest jobs, Hitachi brands offer a wide selection of equipment for more accurate job specifications. Every product is designed to provide efficiency that no other chop saw brand can mimic.
The materials being used in constructing the equipment have been carefully selected to offer the most durable brand of chop saws on the market.
Until next time, keep on sawin’!