Makita LS1040 Compound Miter Saw Review 2021

If you are looking for a portable general-purpose miter saw that would prove to be reasonably accurate and very lightweight, then you should definitely check out this Makita LS1040 review.

The 1,650W brush motor of this compound miter saw will provide sufficient power for a variety of specialized purposes, such as cutting crown molding or aluminum.

Not only does the back fence has holes drilled in it for extra support plates, but its left-hand side also features a pivoting section that you can move in and out of position for adequate support.

This compound miter saw comes with a dust bag, material clamp, service tools, and a TCT saw blade.

Makita LS1040 Features

I have thoroughly reviewed the Makita LS1040 Compound Miter Saw features and performance.

To help you better understand what you should be looking for in this compound miter saw, we’ve talked about it in detail below on this Makita LS1040 Review.

Makita LS1040 Build & Safety Features

The Makita LS1040 is an extremely portable compound miter saw a little over 33 pounds. So it is comparatively lighter than other miter saws with similar features, which usually weigh over 35 pounds.

If you have to constantly move this tool on a daily basis, this will prove to be a major benefit.

The side of the tool has a stopper pin, so the handle can be locked in a lowered position whenever carrying it from one place to another.

Once the machine needs to be used, simply the stopper pin will have to be released, and the saw will be ready to go for hours of cutting.

This saw is also equipped with a safety lock-off button, which will help prevent it from starting up unintentionally. There is even an electric blade brake, which can be used in cases where the blade does not stop upon releasing the switch trigger.

15 AMP Motor

4600 RPM of no-load performance will be delivered by the 15 Amp direct-drive dynamically balanced motor of this compound miter saw.

Unlike belt-drive units, Makita has engineered this motor such that it will never bog down or slip.

Even under load, constant speed will be maintained by the electronic speed control, and this compound miter saw will start up smoothly each and every time thanks to the soft-start technology.

Rapid Set Up

It will not take more than 2 minutes to have this compound miter saw up and running, and you will not even have to read the manual or use anything that did not come with it.

The blade was pre-installed, and everything was in place, so the Makita LS1040 was practically ready for cutting straight out of the box.

You will be able to make any adjustments quite intuitively, and you will not have to use any additional tools.

You also do not have to bother with removing rust prevention goop or pondering over mysterious parts contained in little packages.

Precise Cutting Angles

The construction of the turn base’s swiveling mechanism is impressive. The miter angle of this saw is the same as that of any other miter saw.

Simply, the lock lever has to be pressed, rotated to the desired angle, and then released.

However, this compound miter saw has a comparatively more refined and solid movement. Not only the turn base moves smoothly, but there are also nine positive stops between 0 and 45 degrees, both left and right, where the turn base can be locked in precisely and solidly.

Types of Cuts

This compound miter saw is ideal for press cutting. There is a vice that can be used to secure the workpiece in position, and it can then be cut very smoothly by lowering the blade.

Similarly, you can also adjust the blade to any desired miter angle in order to accomplish some miter cutting.

The blade can also be locked into any desired bevel angle by loosening the lever so that the blade tilts and then tightening the lever once the blade is at the desired bevel angle. This compound miter saw can make precise bevel cuts.

Excellent Fence

The Makita LS1040 is equipped with a solid fence that features an excellent finish and fit. It will barely flex and will be perfectly square to the cutting surface.

A useful sub-fence is also included that provides support when making miter and square cuts, while it can also be flipped to the side when clearance is required to make bevel cuts.

What We Like

  • Accurate measurement indicators
  • Comfortable grips with barely any vibrations
  • Easy to use
  • Lightweight and portable
  • Quiet yet speedy operation
  • Very sturdy

What We Don’t Like

  • The dust collector bag is not very useful.

Frequently Asked Questions (FAQs)

  • Q: Can the Makita LS1040 saw be used to cut 4×4 inch timber?
  • A: Yes, the Makita LS1040 can cut 4×4 inch timber without any problems, although it may take slightly more time to cut hardwoods.
  • Q: What are the cuts like that this saw makes?
  • A: Absolutely perfect cuts are made by this saw, so it can be woodworking projects like building small cabinets or wall clocks.

Wrapping it Up

If you are looking for one of the best compound miter saws with a clean design and solid construction, then it is unlikely you will get anything better than the Makita LS1040 review with this price range.

Hopefully, this Makita LS1040 review has convinced you that the quality of construct that this compound miter saw’s features are beyond impressive, and it will ultimately exceed your expectations once you operate it.

Check Price and Reviews on Amazon