Best Scroll Saw for Marquetry in 2022

Updated 9/25/2020

Have you ever created a picture by cutting different pieces of paper and putting them back together?

If so, replacing paper with wood will get you as close as possible to the process of marquetry.

Using thin veneers of wood to make a structure is an advanced woodworking skill that requires more than just a crafty hand.

For that reason, you’ll need a sawing power tool that’s capable of cutting small and intricate pieces of wood to fit your structure. In that case, this one is a scroll saw.

In this article, I’ll walk you through everything you need to know before picking the best scroll saw for marquetry available out there.

So without further ado, let’s dive in!

No Time to Read? Check Out Our Top Picks at a Glance!

Disclaimer: As an Amazon affiliate, this site earns a small commission for all qualifying purchases.

What is Marquetry?

One of the best ways to pick the best scroll saw for marquetry is by understanding marquetry itself.

As you already know, marquetry is the art of creating patterns and designs from thin veneers or layers of materials.

It’s also known as “intarsia,” as there is almost no difference between the two techniques.

These materials can be anything from hardwood, ivory, or even shells. However, wood is the most commonly used material for it.

This art is one of the oldest in recorded history and dates back to thousands of years.

To create marquetry artwork, you need to cut a solid body from any material into a form that can receive a section from the other one.

In other words, you fit the small piece into the inlay surface. In fact, “marqueter” in French means “to inlay”.

A scroll saw is great for marquetry because it’s able to cut intricate pieces of wood into different forms, such as curves and edges.

It has a lot in common with a band saw, except it’s powered by electricity.

It has a similar fine blade in the middle that you pivot the table itself to make the cuts with it.

The reciprocating blade of the saw allows the machine to also bevel the piece of wood. All that happens through a pre-drilled micro hole that you start from.

Things to Look for in the Best Scroll Saw for Marquetry

As you can see, marquetry requires accuracy and stability while working. That’s why a scroll saw is a great feat for it.

However, there are some aspects that you need to consider while looking for the best scroll saw for marquetry.

Let’s have a look at some of these points, so you can make the right decision.

Blade Angle

To create beveled edge cuts, you need to be able to angle your saw as you like. Ideally, the best scroll saws should be able to tilt 45 degrees on both sides.

However, you may find some machines that offer minimal tilting that can be as shallow as 15 degrees. Choosing the one that fits you depends mainly on your line of work.

Throat Size

Throat size might sound a bit offbeat, but it’s a crucial measure for the quality of a scroll saw. It describes the amount of space you have for cutting. 

It’s measured as the distance between the blade and the holding arm while the wood is hitting its back.

A good throat size to go for is anywhere between 16 to 20 inches. 

Cutting Depth

Unlike other types of saws, you don’t need a huge cutting depth in a scroll saw. However, you need to make sure that it cuts at least 2 inches into the wood.

Top 5 Scroll Saws for Marquetry on the Market Today

Since scroll saws are relatively rarer than other types of saws, it’s not easy to stumble across a good one.

To make sure that you make the right choice, I’ll guide you by reviewing some of the best options for that type of art. 

We’ve scoured the market to find the top-rated scroll saws, so you can pick the one that suits you the most. Let’s take a look!


DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw

We’re kicking off the list with one of the best-selling scroll saws available on the market. The Dewalt’s DW788 scroll saw will be sufficient for all your woodworking and marquetry needs. 

It comes with a 1.3 amp motor that allows you to cut as small as 0.75 inches. These intricate cuts are essential for high-quality artworks.

It has a sturdy body that is highly stable while cutting through small veneers of wood. This allows you to work with minimal vibrations for maximum precision.

What We Like

● Comes with three years of warranty

● You can change blades without using tools

● Allows you to angle the table up to 45 degrees

What We Don’t Like

● A bit pricier than other models

Check out our full DeWalt DW788 review here!


WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

If you’re on a budget, you don’t have to compromise on the quality. In fact, WEN 3921 scroll saw is an inexpensive choice that packs a lot of quality that you can only find in higher priced models.

This scroll saw has a throat size of about 16 inches, which provides you with ample space for your marquetry.

Since marquetry requires frequent changing of the blades, you’ll be delighted to know that this one has a thumbscrew system. 

This allows you to change the blade without needing any additional tools.

What We Like

● An affordable option for buyers on a budget

● Features an onboard storage space for the blades

● Cast iron base for stability

What We Don’t Like

● Many users complained about the flimsiness of the pinless blade adapter

Check out our full review of the Wen 3921 scroll saw here!


ShopSeries RK7315 16″ Scroll Saw with Variable Speed Control

The ShopSeries RK7315 is another great choice for marquetry. It has variable speed controls that allow you to cut efficiently through thin layers of wood with no vibrations.

Also, it allows you to make angled and beveled cuts, as you can tilt the scroll saw up to 45 degrees. 

Despite being stable, the scroll is relatively lighter than other models, so it’s a great choice for those who prefer portability.

What We Like

● Lightweight and easy to carry

● Comes with a two-year warranty

● Features an onboard blade guard and holder

What We Don’t Like

● You need to retighten the blade more often while using them.


Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw

If you prefer worry-free purchases, this one is ideal for you. The Delta Power 40-695 is a heavy-duty scroll saw that comes with a 5-year warranty to ensure the quality of the product. 

What makes it great for marquetry is that it’s highly stable due to its solid structure. Also, it has a huge throat size, so you can work with larger marquetry pieces at a time.

The ability to work from different angles is also a plus in this model. However, it’s only ideal for people with a stable workshop, as it’s not the best option for transportation.

What We Like

● Generous warranty of up to 5 years

● Allow for beveled and angled cuts

● Heavy-duty machinery with different speed controls

What We Don’t Like

● Significantly heavier than some other models

Check out our full review of the Delta Scroll Saw 40-694 here!


Shop Fox W1713 16-Inch Variable Speed Scroll Saw

Last but not least, the Shop Fox W1713 is a great option if you’re looking for a scroll saw that would get the job done.

It has a 1.2 amp motor that delivers enough power for all marquetry requirements. However, you can adjust the speed of the scroll saw to suit your requirements.

However, I think that it’s great for simple marquetry with very thin layers of wood, as it gets a bit unstable when you blast it full speed.

Despite being inexpensive, the scroll saw still comes with some accessories that come in handy, like a blade holder, a gooseneck air blower, and more. 

What We Like

● Works with multiple types of blades

● Good choice for simple marquetry

● An inexpensive model with a bunch of accessories

What We Don’t Like

● Not ideal for high-speed cuts

Check out our full Shop Fox Scroll Saw review here!


Best Scroll Saw Blades for Marquetry

In addition to the machine abilities, you need to make sure that your scroll saw blades are fit for the job. 

As a rule of thumb, whenever you suspect that your blade is getting dull, you need to change it.

Luckily, the blades aren’t expensive, and having fresh ones will guarantee excellent quality to your woodworking arts.

Here’s our list of the 5 best scroll saw blades for marquetry!


Wrapping it Up

However, if you’re on a budget, you can’t go wrong with the Shop Fox W1713. Despite being inexpensive, it’s fairly precise and works like a charm on different kinds of wood!

There you have it. A complete guide with everything you need to know before picking the best scroll saw for marquetry.

As you can see, a good scroll saw for marquetry needs to be flexible, precise, and make clean cuts.

That’s why I recommend the DEWALT DW788 as the overall best scroll saw for marquetry.

Good luck, fellow scrollers!